Setup

The Setup contains the settings required for correct communication between the PC and the Bootloader.

	Saves the set interface parameters
	The „Test Com“ command allows an automatic search for the Bootloader at the COM ports supported by Memory Manager, independently of any current setup settings (connection via USB).

	„Test IP“ has the same function as „Test COM“, but for the Ethernet connection. „Test IP“ only returns a valid result when the Ethernet interface of the BLNET has already been parameterised and the IP address and port of the Bootloader have been correctly specified.
	This is only required for the BL232 Bootloader, with the BL-NET the storage is large enough to save both the logged data and the system data at the same time.
	Selection of the standard directories
	Memory Manager language selection

The menu is used for configuring the basic settings of the BL-NET (see “Connecting the BL-NET to a LAN network”):

1. Node number of the BL-NET in the CAN network 2. IP address of the BL-NET 3. Subnet mask of the BL-NET (not used) 4. Gateway of the BL-NET (not used) 5. Bootloader number (= last position of the MAC address) 6. HTTP port for web browser access 7. TA PORT for communication with Memory Manager and Winsol

Warning! The IP address is not transferred when downgrading from version 2.11 to 1.43 and also when a new upgrade to version 2.11 is carried out. Hence a USB connection is essential!