Function overview editor

File → Function overview editor The function overview is a menu page in controller which only displays the information which is relevant to the customer.
The parameters displayed there can also be assigned an authorisation for changing the setting values.

Procedure for inserting a display parameter into the function overview::

1. Select the parameter to be displayed in the function overview from the list of available parameters.
2. Select the position in the list of parameters of the function overview, above which this display parameter is be inserted.
3. Select the authorisation for changing the parameter.
4. Insert the selected display parameter in the function overview.

and the Ctrl + arrow right key combination insert the parameter selected in the list <Available Parameters> at the requested position of the list <Function Overview>.

and the Del key delete the display parameter marked in the <Function Overview> list.

Authorisations for changing the parameter:

The A, B and C areas of application are only relevant in combination with a CAN monitor. If the application area A is set for the client on the CAN monitor, he only sees the technician’s display parameters and those of application area A which can be edited by him.
At the controller itself, it makes no difference to the client whether a parameter is assigned the A, B or C area of application.

The editing authorisation assigned is displayed in the <Function Overview> list for every parameter and can be subsequently edited for a marked display parameter with respective key combinations.