Configuring the virtual COM port

Winsol and Memory Manager support the COM ports COM1 – COM6. If the virtual COM port assigned to the driver on installation is not supported by the Winsol and Memory Manager programs, the driver can be manually assigned a different free port. For a PC with an internal modem, it should be noted that COM3 is usually used for this modem.

The Bootloader must be connected to the PC in order to configure the virtual COM port in the Windows „Device Manager“.
Windows 98:
Start Settings Control Panel System Device Manager Ports (COM and LPT)
Windows 2000, XP (classic view):
Start Settings Control Panel System Hardware Device Manager Ports (COM and LPT)
Windows Vista (classic view):
Start Settings Control Panel Device Manager Ports (COM and LPT)
Windows 7:
Start Control Panel Hardware and Sound Device Manager Ports (COM and LPT)

The driver can be assigned a different COM port in the properties of the <USB Serial Port>:
USB Serial Port Properties Port Settings (Port Settings) Advanced…